Skip to content

BendBoard 002

Corner profile. 90° transitions at ceiling and wall junctions.

30070

Cross-section, dimensions in mm. Board thickness 12.5 mm.

About this profile

BendBoard 002 is a plain 90° L-section with a 300 mm base and a 70 mm upstand, without any return. It gives a single-piece, straight arris where a suspended ceiling meets a wall or where a bulkhead face turns into its soffit. It suits simple drywall details that need no shadow gap or light cove; for those, the return-edge BendBoard 001 is the counterpart.

Where it is used

  • Shallow bulkheads where the 70 mm upstand forms the entire visible face.
  • Box-outs around beams and ductwork, with the 300 mm leg as the soffit and the 70 mm leg as the side.
  • Ceiling edges around stairwells and voids that need a straight, sharp arris without a corner bead.

On site

With no return to shield it, the folded arris is the most exposed part of the piece. Carry and stack lengths flat so the edge is not knocked before it is fixed.

Fix both legs to framing so the fold holds a true 90°, and keep end joints well away from the corner. Since the arris is formed in the factory, only the flat-face joints and screw heads need filling.

Made to measure

Both leg lengths and the angle can be changed, which adapts 002 to a deeper bulkhead face or a wider soffit. Send the two leg dimensions and the angle for a quote.

Installation detail

Technical drawing showing how the profile connects to the metal framing.

BendBoard 002 installation detail 1: connection to the suspended ceiling framing
BendBoard 002 installation detail 2: connection to the suspended ceiling framing

Other corner profiles