Skip to content

BendBoard 006

Channel profile. U-shaped light coves, curtain pockets and service channels.

30070

Cross-section, dimensions in mm. Board thickness 12.5 mm.

About this profile

BendBoard 006 is a symmetrical U-channel with a 300 mm base, two 70 mm side legs and a 25 × 50 mm return on each edge. The double return narrows the opening from both sides, hiding the LED source in a wide light cove and leaving a neat shadow line on either side in the ceiling. It is the widest channel in the range and the only one with returns; BendBoard 012 offers a plainer section.

Where it is used

  • Wide recessed light coffers, with an LED strip hidden behind each return so both edges glow evenly.
  • Central light channels over reception desks and shop counters, where the 300 mm width frames the area below.
  • Double shadow lines along a corridor, one on each side of the channel.

On site

Depending on the design, it goes in base up as a recessed channel or base down as a raised band. Hang both legs from framing so the two returns stay level with each other.

Each return is its own pocket, so run cables to both sides before the ceiling is closed. Painting the inside in the same finish as the ceiling makes channel and ceiling read as one surface.

Made to measure

Base width, leg height and return size can be changed to suit the project. Send a section with all dimensions and the total length of the run.

Installation detail

Technical drawing showing how the profile connects to the metal framing.

BendBoard 006 installation detail 1: connection to the suspended ceiling framing

Other channel profiles