BendBoard 011
Channel profile. U-shaped light coves, curtain pockets and service channels.
Cross-section, dimensions in mm. Board thickness 12.5 mm.
About this profile
BendBoard 011 is an asymmetric U-channel with a 250 mm long leg, a 250 mm base and a 70 mm short leg. Because one side is much taller than the other, it suits light coves and curtain pockets that must stay closed on one side only, and bulkhead details that link two different ceiling levels. It is the only asymmetric profile in the plasterboard channel family.
Where it is used
- Light coves screened on the room side by the 250 mm leg and left open towards the ceiling.
- Curtain pockets at a façade, with the tall side facing the room and the short leg meeting the window head.
- Bulkheads that link two ceiling levels, with the long leg covering the height difference.
On site
With an asymmetric section, orientation matters: mark which side the 250 mm leg goes on, both on the drawings and on site, before fixing. The long leg carries more of the load once hung, so fix it to framing along its full height.
The 70 mm leg is the lip that hides the light source or the top of the curtain. Check that it sits at the right level relative to the fitting before the ceiling is closed.
Made to measure
All three dimensions can be changed, including the ratio between the long and the short leg. Send the two leg heights, the base width and the level difference to be covered.
Installation detail
Technical drawing showing how the profile connects to the metal framing.


