BendBoard 009
Stepped profile. Level changes and strip details in ceilings.
Cross-section, dimensions in mm. Board thickness 12.5 mm.
About this profile
BendBoard 009 forms a step 100 mm wide and 50 mm high between two 100 mm legs. It takes the hat-shaped section of BendBoard 008 to a larger scale, giving a clearly visible level change, a broad band that zones a space, or a recess with room for linear lighting. It suits zoning in retail and office suspended ceilings, where a 20 mm step would read as only a line.
Where it is used
- Zoning bands in open-plan offices and on retail floors that mark out a counter or seating area.
- Recesses for linear lighting, with the 100 mm width and 50 mm depth housing the fitting.
- Clear ceiling level changes where the step should read as a deliberate edge rather than a line.
On site
The 100 mm legs give generous fixing on both sides of the step. Screw both to framing so the step stays square along the whole run.
A step this size is noticed from across the room, so check its alignment with the walls or furniture below before fixing. If it will house lighting, prepare the cable route before the ceiling is closed.
Made to measure
Step width, step height and leg lengths are made to measure, from a slim line up to a deeper recess. Send the step size and the run length for a quote.
Installation detail
Technical drawing showing how the profile connects to the metal framing.


