Skip to content

Stepped plasterboard ceiling profiles

Stepped plasterboard profiles that create level changes, raised strips and shadow gaps in ceilings. Both folds are made in one piece, so the step height is identical at every point and the risk of joints and cracks drops. Used for zoning in retail and office ceilings, linear lighting runs and decorative ceiling strips. Step dimensions from 20 mm upwards, made to suit your project.

Profiles

Stepped plasterboard ceilings and shadow gap profiles

How a stepped plasterboard ceiling is usually built

On a conventional job, a level change or strip detail in a ceiling is built from separate pieces. A narrow strip of board is fixed as the face between the two levels, both arrises get a corner bead or corner tape, and the corners are filled. Shadow gaps are often formed with a metal shadow gap trim instead. The smaller the step, the harder it gets: cutting and fixing a 20 mm face strip and keeping both of its arrises straight along a run takes real skill.

BendBoard stepped profiles make both folds in one piece. The back of 12.5 mm plasterboard is V-grooved in the factory and the board is folded into a hat-shaped section. The step height is identical at every point, and there are no joints at the step corners to crack.

BendBoard 008 and 009: fine line or clear level change

BendBoard 008 forms a small 20 × 20 mm step between two 50 mm legs. It is the smallest step in the family and is meant for slim line details.

BendBoard 009 forms a step 100 mm wide and 50 mm high between two 100 mm legs, taking the same hat-shaped section to a larger scale.

Step dimensions start at 20 mm and are made to suit the project. A section drawing or a set of dimensions is enough to start.

Shadow gaps, raised strips and zoning

BendBoard 008 works two ways depending on how it is fixed: one way it forms a fine shadow gap in the ceiling, the other way a slightly raised decorative strip. BendBoard 009 gives a clearly visible level change, a broad band that zones a space, or a recess with room for linear lighting, which suits retail and office suspended ceilings.

The profiles screw to standard metal framing for suspended ceilings, with no special carrier. Joints fall where the legs meet the flat ceiling board and are finished as normal. Each product comes with an installation detail drawing.

When a stepped profile makes sense

Pre-formed steps save the most work on long, straight shadow gap runs, on strip details that repeat across a ceiling, and on small steps that are hard to build neatly on site. For a single short level change, the conventional method may be all you need.

For large level changes and deep bulkheads, corner profiles or the asymmetric BendBoard 011 channel, which links two ceiling levels, are a better fit than a stepped profile. Profiles are made to order, so get the section signed off before ordering.

How do you build a stepped plasterboard ceiling?
Conventionally, a strip of board is fixed as the face between the two levels, with a corner bead and filling on both arrises. With a stepped profile, both folds are made in the factory in one piece; the profile screws to standard framing and only the joints on the flat faces need finishing.
How do you create a shadow gap in a plasterboard ceiling?
On site, usually with a metal shadow gap trim or a gap left between board edges. Fixed the right way round, BendBoard 008 forms a 20 × 20 mm shadow gap from a single folded piece of plasterboard.
What is the smallest step you can make?
The smallest standard step is the 20 × 20 mm of BendBoard 008. Step dimensions start at 20 mm and are made to suit the project.
Do stepped profiles need special framing?
No. They fix to the standard metal framing used for suspended ceilings, and each product comes with an installation detail drawing.
What do you need for a quote?
The profile code or a section drawing, approximate lengths, the project location and the required delivery date.

Get a quick quote for your project.

Share your drawings or dimensions and we will work out the right profile, price and delivery together.