BendBoard 013
Arch profile. Semicircular arches and vault transitions.
Cross-section, dimensions in mm. Board thickness 12.5 mm.
About this profile
BendBoard 013 is a one-piece plasterboard arch in which two 150 mm legs are joined by a full semicircle with an arc length of 290.2 mm. The straight legs let the arch run flush into the wall faces on either side of an opening. It is used for arches over doorways and passages, the heads of wall niches and barrel-vault transitions, and it is the only 180° curved plasterboard profile in the range.
Where it is used
- Arched doorways and passage openings in homes and hotels, with the 150 mm legs running into the wall faces on either side.
- The rounded heads of wall niches and display recesses.
- Transitions between a flat ceiling and a barrel vault.
- Shop windows and display frames with a semicircular top.
On site
Set the two 150 mm legs plumb and at the same height first; the semicircle then centres itself over the opening. Screw the legs to framing on each side and support the crown from the framing above.
Joints with the wall boards fall on the straight legs, below the springing line. Because the curve is one piece, there is no joint to fill on the arc itself.
Made to measure
Opening width, leg height and radius are all made to measure. For a quote, send the clear opening width, the leg height and the number of openings.
Installation detail
Technical drawing showing how the profile connects to the metal framing.


