Curved plasterboard profiles
Curved plasterboard profiles with an R100 radius for designs that call for a soft transition instead of a sharp corner. The board is bent in the factory using closely spaced V-grooves, so there is no wetting, formwork or flexible board on site. Used at ceiling-to-wall junctions, column heads and curved bulkheads. Radius and arc length can be adjusted to your project.
Profiles
Guides
Curved plasterboard: radius, methods and applications
Bendable boards, bent board or curved plasterboard?
Searches for bendable boards, curved boards or bent board usually come from people who need a curve in a ceiling or wall. In landscaping, bender board means flexible garden edging, which is a different product. If your curve is in drywall, what you need is curved plasterboard, either bent on site or pre-formed in a factory.
BendBoard profiles are pre-formed. The back of standard 12.5 mm plasterboard is machined with closely spaced V-grooves and the board is bent to the required radius before it leaves the factory. It arrives as a finished piece with the curve and its straight legs.
Curved plasterboard radius: R100 standard, others made to measure
BendBoard 005 is a soft R100 transition with a 265.9 mm base and a 129.1 mm arc length. BendBoard 010 is an R100 curve between a 100 mm upstand and a 150 mm horizontal leg.
R100 is the standard radius. Other radii, arc lengths and leg lengths are made to measure from a section drawing or a set of dimensions.
On-site bending compared with pre-formed profiles
On site there are three common methods. Standard board bends dry to large radii, or wet to tighter ones, but then has to dry on a former before jointing. Kerfing, a series of saw cuts across the back, works for small one-off pieces but is hard to repeat. Thin flexible board is fixed in two or more layers to curved framing and is hard to beat over large areas.
Pre-formed profiles need no wetting, formwork or flexible board, and every piece comes out the same. They have to be ordered ahead, and the geometry is fixed once produced, so get the section signed off first.
Curved plasterboard ceiling details
Typical uses are soft ceiling-to-wall junctions, column heads and curved bulkheads. Because the curved part is one piece, the joints sit in the straight legs, where they are easier to finish. For a long barrel ceiling or a gently curved wall, bending standard or flexible board on site is often simpler.
- Can you bend 12.5 mm plasterboard?
- On site, only to large radii, even when wet. Check your board manufacturer's bending table. For tight radii, use thin flexible board in layers or 12.5 mm board that has been V-grooved and bent in the factory.
- What radius does BendBoard curved plasterboard come in?
- The standard curved profiles, BendBoard 005 and 010, have an R100 radius. Other radii and arc lengths are made to suit the project.
- Is a bender board the same as curved plasterboard?
- No. Bender board usually refers to flexible edging for gardens and paths. For curved ceilings and walls in drywall construction, you need curved plasterboard.
- Do curved profiles need special framing?
- No. They screw to standard metal framing for suspended ceilings and partitions, and each product comes with an installation detail drawing.
- What do you need for a quote?
- The profile code or a section drawing, approximate quantities, the project location and the required delivery date.

Get a quick quote for your project.
Share your drawings or dimensions and we will work out the right profile, price and delivery together.

